dpCREATOR Controller

Short videos of the dpCREATOR WebUI, one feature at a time. New ones are added here as they are made.WebUI Pro overviewWhat is on the screen, connecting, joggin..

Prefer to watch? See the WebUI video tutorials, starting with Centre Finder.The dpCREATOR WebUI is the control page served by the controller itself. Open the bo..

These are the earlier dpCREATOR controller boards. They are discontinued and no longer sold. This page shows them for reference and to help owners identify thei..

The dpCREATOR R2 and R3 share one pinout. The table below matches the example config dpcreator_r2_r3_w5500.yaml that ships with the firmware. Main features ES..

A fresh firmware install already starts with Ethernet on and DHCP: plug in the cable and find the IP. Use this page to change to a fixed IP, or to switch back ..

The controller drives a spindle two ways: PWM + relay (default in the example config) or a VFD over RS485 (Modbus). Use one of them in config.yaml. PWM + relay..

The board shares its SD card on your network at http:///sd. Map it once and copy G-code onto it like a USB stick. Pendant previews (.viz) are built automatical..