SmartTabUI pendant for dpCREATOR controllers
A pendant that knows your job, not just your axes
Most pendants jog. SmartTabUI follows the running job, tells you where to pick up after a stop, measures parts and traces offcuts for Studio, all from the machine side.
In the box, and on us
- dpCREATOR Studio Basic, free
- Firmware updates from your browser, free
- Assembled, flashed and tested before it ships
- Link
- 1 Mbaud serial
- Screen
- 2.8″ touch
- Handwheel
- 60 mm, 100 ppr
- Safety
- Hardware E-stop
Pick up after a stopAfter a power cut or E-stop the pendant shows the line to resume from, and the job carries on from there.
Follow the running jobProgress, position and state at the machine, with Hold and Abort right on the screen.
Measure, record and retraceMeasure parts, record points with ENABLE and trace an offcut straight into Studio.
Jog by feelA real handwheel with axis and step selectors. Zero and probe without walking to the computer.
Touchscreen pendants with MPG jog wheel and hardware E-stop, wired to your FluidNC controller.
New
Coming soon
Brand: dpCREATOR
Coming soon. The combo will be available when the first R3 batch is ready. The pendant on its own comes first. Orders are not open yet. To hear when they open, subscribe to the newsletter at the bottom of this page or contact us.Everything to run a FluidNC CNC machine: the dpCREATOR R3 controller an..
529.00€
New
Hot
Brand: dpCREATOR
Firmware for the SmartTabUI touchscreen pendant (JC2432W328C, ESP32).Try it first: the live demo runs the SmartTabUI pendant screen and the dpCREATOR WebUI in your browser. Jog with the handwheel, run a job and test the E-stop.The dpCREATOR WebUI is free with the R3 controller. For other boards it i..
49.99€
New
Brand: dpCREATOR
The SmartTabUI pendant firmware for a business. Buy this licence when the pendant is used for paid work: in a workshop or production, on machines that make things for sale, or on a machine you build and sell to a customer.It is the same firmware as the personal licence (€49.99), which is for hobby u..
99.00€
New
Hot
Brand: dpCREATOR
ESP32 (WROOM-32) board? WebUI Lite is free: the same WebUI with the features a WROOM-32 can't run turned off, and it works with Studio Basic. Install it from the Flash Firmware page.
Free with the dpCREATOR R3dpCREATOR WebUI
A power cut is not the end of the job
The controller records the job as ..
39.00€
New
-33 %
Coming soon
Brand: dpCREATOR
Free with the dpCREATOR R3dpCREATOR Motion · Beta
Automate any project with dpCREATOR Motion and FluidNC
Wire a motor, sensor or output, test it, then add the next: Motion writes the controller config for you and helps when something doesn't work. When it all moves, teach the positions and run the..
19.99€ 29.99€
New
-34 %
Coming soon
Brand: dpCREATOR
Motion for machines used in a business: production machines, test rigs, conveyors and machines you build and sell to customers, on FluidNC boards other than the dpCREATOR R3.It is the same app as the personal licence (€29.99, €19.99 while Motion is in beta), which is for hobby use. €39 while Motion ..
39.00€ 59.00€
New
Coming soon
Brand: dpCREATOR
Coming soon. The assembled pendants are built in small batches. The first batch of 5 is being prepared. Orders are not open yet. To hear when they open, subscribe to the newsletter at the bottom of this page or contact us.The pendant in one minute:More short videos, one topic at a time: pendant vide..
219.99€
Showing 1 to 7 of 7 (1 Pages)