SmartTabUI pendant case DPC-TC1, version 1
dpCREATOR - https://dpcreator.eu

For the SmartTabUI pendant: ESP32 board with a 2.8" touch screen.
The files are 3MF in millimetres, already turned the right way up for printing.

Parts
  1_Case_body.3mf            Case body                     97 x 192.5 x 24.3 mm   print 1
  2a_Top_plate_full.3mf      Top plate, closed             97 x 159 x 7.6 mm      print 1 of the two top plates
  2b_Top_plate_for_panel.3mf Top plate with a panel recess 97 x 159 x 7.6 mm
  3_Panel_2mm.3mf            2 mm front panel              93.2 x 155.2 x 1.9 mm  for top plate 2b
  4_IO_expander_clip.3mf     IO expander clip              18.8 x 81.9 x 10 mm    print 1
                             holds the IO expander board inside the case
  Render.png                 How the parts go together

Choose a top plate
  2a: a plain closed top.
  2b + 3: a top with a separate 2 mm panel. Print the panel in another colour,
          or use its outline to cut one from 2 mm acrylic or aluminium (SVG/DXF).

Material: PETG, as used for the assembled pendants.

Assembly, wiring and firmware: https://dpcreator.eu/docs/build-tabui-pendant
Pendant firmware: https://dpcreator.eu/firmware (Pendant firmware tab)
The controller needs the free dpCREATOR FluidNC firmware; stock FluidNC is not supported.

Licence
  (c) 2026 dpCREATOR (digital project creator)
  Creative Commons Attribution-NonCommercial-ShareAlike 4.0 (CC BY-NC-SA 4.0)
  https://creativecommons.org/licenses/by-nc-sa/4.0/
  You may print, change and share these files. Credit dpCREATOR, don't sell
  the files or prints made from them, and share any changes under the same
  licence.
